Sprache/ Language:
 german-pasco-fix-medium-3.png
 
 original-industrial-adhesive-glue-online-shop-pascofix-large-2.jpg
 

 

PASCO PROFI Repair Kit / Case

PASCO PROFI Repair Kit / CasePASCO PROFI Repair Kit / Case containing: PASCO FIX Industrial Adhesive 20 g, PASCO FILL Granulate 20 g, PASCO CLEAN Special Cleaner 20 ml, PASCO ACTIVATOR Accelerator 15 ml, PASCO PRIME 15 ml, PASCO REP AQUA 60g, PASCO REP STEEL 60 g. One for all !
 
Art.No.:016
Delivery time: Available now


Add to cart

 pasco-repairkit-industrial-adhesive-industrial-glue-super-glue-1-large-2.jpg
PASCO PROFI Repair Kit containing:
 
PASCO FIX Industrial Adhesive 20 g,
PASCO FILL Granulate 20 g,
PASCO CLEAN Special Cleaner 20 ml,
PASCO ACTIVATOR Accelerator 15 ml,
PASCO PRIME Primer 15 ml,
PASCO REP AQUA Modeling Clay 60 g
PASCO REP STEEL Modeling Clay 60 g.
 
PASCO
FIX glues:

 

Wood, steel, aluminium, brass, copper, porcelain, ceramic, stone, GRP, glass, leather, rubber, PMMA, hard PVC , ABS, Luran and all commercial plastics to themselves and each other.

 

INDUSTRY TRADE HOME COMMERCIAL

 

    - No drying-up

    - Easy to handle

    - Economical in all areas

    - Ready to use immediately

    - No mixing required for material combinations

    - Just one adhesive for all materials

 

 

Product description

PASCO FIX industrial adhesive is a high-quality product of modern chemistry. It brings a true sensation to the field of adhesive technology.

Alpha-cyanoacrylate ester is used as the key chemical, which retains its specific properties and performance through the use of additives. The quality of the adhesive is determined by the high degree of distillation. PASCO FIX is the result of many years of research and professional manufacturing.

This explains the almost unlimited number of possible gluing combinations. PASCO FIX also meets the highest demands in terms of elasticity, resistance to cold and heat, and to chemicals. PASCO FIX is absolutely water resistant.

Its outstanding properties include simple processing that requires no component mixing, quick setting even on absorbent surfaces, and very high strength.

 

Applications

PASCO FIX can be used in industrial manufacturing (e.g. automotives, plastics, sporting goods, model building, photo and optics, dental technology), in various trades and workshops as well as at home to a great extent.

With PASCO FIX, you get high-strength bonding that is suitable for wood, steel, aluminium, porcelain, PMMA, rubber, PVC, ABS, Luran and essentially all other commercial plastics and much more. They can be glued to themselves and to each other.

Not suitable for cloth, paper, polyolefins (Teflon, polyethylene and polypropylene). Please note: For gluing polyolefins (polyethylene and polypropylene) ask for our PASCO PRIME. Environmental protection: PASCO FIX is completely non-toxic (children's toys, dental technology) once it has set.

 

Application instructions

Clean materials well with PASCO CLEAN before gluing them. Somewhat more adhesive must be applied for highly absorbent materials. We recommend that you carry out some preliminary tests with PASCO FIX. The surfaces of the parts to be glued must be free of rust, dust and grease. If necessary, roughen surfaces first with fine sandpaper (leather). Remove traces of old glue (scrape off). The thinner the adhesive is applied (do not rub in), the better and stronger the bond. Allow the glue to dry for a few minutes. The glue will dry at different rates with different materials! The best gluing results are obtained at room temperature. Any adhesive bond is completely set after approx. 6 hours.

 

Liability

We assume no liability for any damage resulting from improper handling or use of PASCO FIX industrial adhesive, also including damages to third parties.

 

Guarantee and important information for the storage of PASCO FIX

We guarantee a shelf life of 1 year for PASCO FIX industrial adhesive on the condition that the bottle is sealed again after it has been opened. Always keep it in an upright position and in a cool, dark and dry place. Unopened containers can be kept for a longer time if they are deep-frozen. This slows down the ageing process considerably.

 

Opening the container

Use scissors to cut open the pipette or bottle at the base of the tip. Do not point the pipette or bottle towards your eyes when opening.

 

Attention: New!!! It is possible to glue polyolefins (PE and PP) in combination with PASCO PRIME. 

 

 

 

PASCO FILL the chemical weld

 

PASCO FILL, which is suitable as a filler in combination with PASCO FIX, is used for filling cracks, grooves, holes, and connecting or closing cracked component joints. It is suitable for reinforcing difficult adhesive connections and many other things.

PASCO FILL is resistant to water, UV, heat and chemicals.

 

Application:

Apply a 2-3 mm thick layer of PASCO FILL and then soak well with PASCO FIX. If necessary, secure holes with paper before applying the filler. Cracks should not be wider than 3-4 mm. Depending on the situation, you can also apply PASCO FIX first and then drizzle on PASCO FILL. The second variation has proven itself, especially for weld seams. Always be sure to soak the filler well with PASCO FIX. The hardened connection can be processed mechanically, plastered or painted after approx. 2-3 minutes. PASCO FILL is not toxic, has no adverse effect on the environment and can be disposed of with domestic waste. PASCO FILL is not subject to marking according to the Hazardous Materials Act (GefStoffV).

PASCO FIX as a "catalyst" for PASCO FILL

With PASCO FILL, the stability of such an otherwise impossible corner connection can be obtained with high strength.

PASCO FILL in combination with PASCO FIX is also suitable for filling holes and replacing broken off material.

The PASCO FILL granulate can be used with all materials such as porcelain, wood, steel, non-ferrous metals, plastics, ceramic, paper, cork, etc. The hardened surface can be processed mechanically and painted

 

 

 

PASCO CLEAN

 

PASCO CLEAN special cleaner is suitable for cleaning and degreasing parts of materials to be glued. Always allow it to evaporate before gluing, or wipe it away with a cloth. It is also suitable for removing traces of old glue. Keep the container tightly closed in a cool and well ventilated place. Keep away from children. Highly flammable. Do not inhale the vapours, or allow it to get into the sewer system or ground water.

Warning: There is a danger of explosions from the vapours since they contain acetone.

 

 

 

PASCO AKTIVATOR

 

PASCO AKTIVATOR, also called an accelerator, is a chemical for accelerating the gluing process of PASCO FIX industrial adhesive, especially on wood, porcelain, ceramic, clay, stone and all porous materials.

Due to the suction effect of porous materials, it sometimes takes up to a minute or longer for the glued spots to set.

PASCO AKTIVATOR causes the PASCO FIX industrial adhesive to react quickly with these materials, which are often difficult to bond. As a result, the setting time can be reduced to a few seconds. Only in combination with PASCO FIX industrial adhesive applicable!

 

Application:

Apply PASCO AKTIVATOR with a brush on one side before gluing, and apply our PASCO FIX adhesive to the other side. Then join together the parts to be glued. When using PASCO AKTIVATOR with PASCO FIX industrial adhesive, considerably faster and stronger bonding is obtained for gluing applications such as porous materials, for example stone, clay, ceramic, wood, marble, etc.

 

 

 

PASCO PRIME

 

PASCO PRIME, also called a primer, is a chemical pretreatment for polyolefines, like polyethylen (PE), polypropylen (PP), silikon,and teflon. Apply PASCO Prime on both sides and give a few seconds evaporation before using PASCO FIX industrial adhesive! Only in combination with PASCO FIX industrial adhesive applicable!

 

 

PASCO REP Steel

PASCO REP Steel Molding Clay is a two component epoxy-resin-base result in a firm extensive mould material with a good stability of shape. The coefficient of expansion is similar to aluminium and steel. Bonds, fills, seals simultaneous, even under water. Ideal adhesion on metal, steel, aluminium, copper, brass, cast iron and cast aluminium. The material can be combined as well. Fixing, connecting, filling, mending, repairing, modelling, forming, reparing of broken screw-, nut- and bolt treads, leaks, seals and joints. After harding the PASCO REP Steel Industrial Molding Clay (Kit) can be worked out mechanically like drilling, sanding, cutting, make new treads and painting. Easy handling, unbelievable strength, optical, clean filling and bonding of the different materials. Temperature resistant from -40C to +200C, short-term to +300C and it is in general water, fuel and chemical resistant.

 

PASCO REP Aqua

PASCO REP Aqua Molding Clay is a two component epoxy-resin-base result in a firm extensive mould material with a good stability of shape. The coefficient of expansion is similar to hard plastic. Bonds, fills, seals simultaneous, even under water. Ideal adhesion on wood, plastics, fiberglas, polyester, concrete, stone and metall. The material can be combined as well. Fixing, connecting, filling, mending, repairing, modelling, forming, reparing of broken screw-, nut- and bolt treads, leaks, seals and joints. After harding the PASCO REP Aqua Industrial Molding Clay (Kit) can be worked out mechanically like drilling, sanding, cutting, make new treads and painting. Easy handling, unbelievable strength, optical, clean filling and bonding of the different materials. Temperature resistant from -40C to +200C, short-term to +300C and it is in general water, fuel and chemical resistant.