PASCO FIX glues:
Wood, steel, aluminium, brass, copper, porcelain, ceramic, stone, GRP, glass, leather, rubber, PMMA, hard PVC , ABS, Luran and all commercial plastics to themselves and each other.
INDUSTRY • TRADE • HOME • COMMERCIAL
- No drying-up
- Easy to handle
- Economical in all areas
- Ready to use immediately
- No mixing required for material combinations
- Just one adhesive for all materials
PASCO FIX® industrial adhesive is a high-quality product of modern chemistry. It brings a true sensation to the field of adhesive technology.
Alpha-cyanoacrylate ester is used as the key chemical, which retains its specific properties and performance through the use of additives. The quality of the adhesive is determined by the high degree of distillation. PASCO FIX® is the result of many years of research and professional manufacturing.
This explains the almost unlimited number of possible gluing combinations. PASCO FIX® also meets the highest demands in terms of elasticity, resistance to cold and heat, and to chemicals. PASCO FIX® is absolutely water resistant.
Its outstanding properties include simple processing that requires no component mixing, quick setting even on absorbent surfaces, and very high strength.
PASCO FIX® can be used in industrial manufacturing (e.g. automotives, plastics, sporting goods, model building, photo and optics, dental technology), in various trades and workshops as well as at home to a great extent.
With PASCO FIX®, you get high-strength bonding that is suitable for wood, steel, aluminium, porcelain, PMMA, rubber, PVC, ABS, Luran and essentially all other commercial plastics and much more. They can be glued to themselves and to each other.
Not suitable for cloth, paper, polyolefins (Teflon, polyethylene and polypropylene). Please note: For gluing polyolefins (polyethylene and polypropylene) ask for our PASCO® PRIME. Environmental protection: PASCO FIX® is completely non-toxic (children's toys, dental technology) once it has set.
Clean materials well with PASCO® CLEAN before gluing them. Somewhat more adhesive must be applied for highly absorbent materials. We recommend that you carry out some preliminary tests with PASCO FIX®. The surfaces of the parts to be glued must be free of rust, dust and grease. If necessary, roughen surfaces first with fine sandpaper (leather). Remove traces of old glue (scrape off). The thinner the adhesive is applied (do not rub in), the better and stronger the bond. Allow the glue to dry for a few minutes. The glue will dry at different rates with different materials! The best gluing results are obtained at room temperature. Any adhesive bond is completely set after approx. 6 hours.
We assume no liability for any damage resulting from improper handling or use of PASCO FIX® industrial adhesive, also including damages to third parties.
Guarantee and important information for the storage of PASCO FIX®
We guarantee a shelf life of 1 year for PASCO FIX® industrial adhesive on the condition that the bottle is sealed again after it has been opened. Always keep it in an upright position and in a cool, dark and dry place. Unopened containers can be kept for a longer time if they are deep-frozen. This slows down the ageing process considerably.
Opening the container
Use scissors to cut open the pipette or bottle at the base of the tip. Do not point the pipette or bottle towards your eyes when opening.
Attention: New!!! It is possible to glue polyolefins (PE and PP) in combination with PASCO® PRIME.
PASCO FILL the chemical weld
PASCO® FILL, which is suitable as a filler in combination with PASCO FIX®, is used for filling cracks, grooves, holes, and connecting or closing cracked component joints. It is suitable for reinforcing difficult adhesive connections and many other things.
PASCO® FILL is resistant to water, UV, heat and chemicals.
Apply a 2-3 mm thick layer of PASCO® FILL and then soak well with PASCO FIX®. If necessary, secure holes with paper before applying the filler. Cracks should not be wider than 3-4 mm. Depending on the situation, you can also apply PASCO FIX® first and then drizzle on PASCO® FILL. The second variation has proven itself, especially for weld seams. Always be sure to soak the filler well with PASCO FIX®. The hardened connection can be processed mechanically, plastered or painted after approx. 2-3 minutes. PASCO® FILL is not toxic, has no adverse effect on the environment and can be disposed of with domestic waste. PASCO® FILL is not subject to marking according to the Hazardous Materials Act (GefStoffV).
PASCO FIX® as a "catalyst" for PASCO® FILL
With PASCO® FILL, the stability of such an otherwise impossible corner connection can be obtained with high strength.
PASCO® FILL in combination with PASCO FIX® is also suitable for filling holes and replacing broken off material.
The PASCO® FILL granulate can be used with all materials such as porcelain, wood, steel, non-ferrous metals, plastics, ceramic, paper, cork, etc. The hardened surface can be processed mechanically and painted
PASCO® CLEAN special cleaner is suitable for cleaning and degreasing parts of materials to be glued. Always allow it to evaporate before gluing, or wipe it away with a cloth. It is also suitable for removing traces of old glue. Keep the container tightly closed in a cool and well ventilated place. Keep away from children. Highly flammable. Do not inhale the vapours, or allow it to get into the sewer system or ground water.
Warning: There is a danger of explosions from the vapours since they contain acetone.